VETRORESINA S.p.A.

Via Portuense, 10, 44020 Masi San Giacomo (FE)
Italy
Telephone +39 0532 327911
Fax +39 0532 327110
info@vetroresina.com

Hall map

CARAVAN SALON 2019 hall map (Hall 13): stand E55

Fairground map

CARAVAN SALON 2019 fairground map: Hall 13

Our range of products

Product categories

  • 05  Detachable parts and components for caravans and motor caravans
  • 05.08  Construction parts / Assembly parts
  • 05.08.05  Construction elements

Our products

Product category: Construction elements

GRP Laminates with glass fibre MAT

Versatile GRP laminate with good mechanical and aesthetic properties. Available in a wide range of RAL colours or even customised colours.


In general, this laminate offers:
  • Good resistance to atmospheric agents
  • Good UV stability
  • Good impermeability
  • Good chemical resistance
  • Good electrical insulation
  • Good scratch resistance
  • Ease of cleaning

Main characteristics
  • Glass fibre MAT, available in versions ranging from 300 g/m2 to 1600 g/m2
  • Available in thicknesses ranging from 1.1 mm to 3.0 mm with gelcoat and from 0.8 mm to 2.7 mm without gelcoat
  • Weight 1.5 – 4.3 kg/ m² with gelcoat, 1.2 – 3.9 kg/ m² without gelcoat
  • External finish: glossy or matt gelcoat, no gelcoat
  • Rear finish: sanded, mechanically sanded, calibrated, rough

More Less

Product category: Construction elements

GRP Laminates with glass fibre MAT and woven roving

Versatile GRP laminate with good aesthetic properties and high mechanical strength. Available in a wide range of RAL colours or even customised colours.


In general, this laminate offers:
  • Good resistance to atmospheric agents
  • Good UV stability
  • Good impermeability
  • Good mechanical strength
  • Good chemical resistance
  • Good electrical insulation
  • Good scratch resistance
  • Ease of cleaning

Main characteristics
  • Glass fibre MAT, available in versions ranging from 300 g/m² to 900 g/m²
  • Glass fibre WOVEN ROVING, available in versions ranging from 300 g/m² to 500 g/m²
  • Available in thicknesses ranging from 1.4 mm to 2.9 mm with gelcoat and from 1.1 mm to 2.6 mm without gelcoat
  • Weight 1.9 – 4.2 kg/m² with gelcoat, 1.5 – 3.8 kg/m² without gelcoat
  • External finish: glossy or matt gelcoat, no gelcoat
  • Rear finish: sanded, mechanically sanded, rough, calibrated

More Less

Product category: Construction elements

Vetrostyle GRP Laminates for camper vans and walls

This GRP panels has been designed for the construction of camper van interiors and use in the furnishing industry. For this laminates, the gelcoat is replaced by scratch-resistant impregnated decor paper. Unlike conventional solutions, this product makes it possible to construct camper van walls using a single sheet, without the need for continuity systems. It is also be possible to reduce the weight by selecting the right type of glass fibre support.


In general, this laminate offers:
  • Good impermeability
  • Good scratch resistance
  • No odour absorption
  • Good chemical resistance
  • Good electrical insulation
  • Good impact strength (single sheet, no joints)
  • Ease of cleaning

Main characteristics
  • Glass fibre: all possible combinations of MAT and WOVEN ROVING. LD laminates can also be created with a Vetrostyle finish
  • Available in thicknesses ranging from 1.0 mm to 4.0 mm
  • Weight 1.4 – 4.0 kg/m²
  • External finish: paper with the option of customised decor
  • Rear finish: sanded, mechanically sanded, calibrated

More Less

About us

Company details

Vetroresina, producing Plastic Laminates since 1968

Vetroresina was established in 1968, when it began producing glass fibre-reinforced polyester resin laminates.

Attentive research into the field of composite materials combined with continuous research and development of the processing techniques have enabled the company to reach a considerable production capacity.
Vetroresina has planned substantial investments to maintain and increase the production level. With the help of advanced technology and close relationships with universities and industry experts, the company has managed to identify changes and new requirements arising in the market.

The high level technology together with a greater focus on appearance and materials have led to diversification of the plastic laminates produced, extending the range and fields of application. Vetroresina has a production capacity of 129 pieces per day and its production site covers an area of 46,000 m².
Vetroresina opened a production site in São Paulo, Brazil in June 2000 to meet the needs of the South American market. In May 2008, the company also added a new production site in the USA, from where it can focus on and manage the North American and Canadian market.

Vetroresina S.p.A. has obtained UNI EN ISO 9001/2008 quality certification.

More Less