Manage stand orders
Select Option

PASCO Industrieklebstoffe Inh. Christian Brand

Trattenstr. 42a, 9470 St. Paul
Telephone +43 4357 3988
Fax +43 4357 3989

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Hall map

CARAVAN SALON 2021 hall map (Hall 3): stand C40

Fairground map

CARAVAN SALON 2021 fairground map: Hall 3

Our range of products

Our products

Product category: Service / installation / repairs center

PASCOFIX industrial adhesive 10g bottle

PASCOFIX industrial adhesive is suitable for:
Wood, steel, aluminium, brass, copper, porcelain, ceramics, stone, GRP, glass, PMMA, rubber, rigid PVC, leather, ABS, Luran and almost all commercially available plastics with and among each other

PASCOFIX is not suitable for:
Fabric, silicone, teflon, polyethylene and polypropylene.

PASCOFIX industrial adhesive one of the best adhesives for highest demands
  • Easy and simple handling
  • Economical in all areas
  • Immediately ready for use in a flash
  • No drying in or out
  • Only one adhesive for almost all materials
  • No mixing for material combinations
  • Super strong, storage stable, clean and economical

PASCOFIX industrial adhesive is a high-quality product of modern chemistry. It brings a true sensation in the field of bonding technology. Alpha - cyanoacrylic acid ester is used as the basic material. PASCOFIX industrial adhesive is the result of many years of research and professional production. The quality of the adhesive depends on the degree of distillation. An even higher quality distillation is practically impossible to achieve for technical reasons of production. This explains the almost unlimited combination possibilities for bonding. PASCOFIX also meets the highest demands in terms of elasticity, resistance to cold and heat, and resistance to chemicals. PASCOFIX is absolutely waterproof. Easy processing without mixing components, fast curing even with porous / absorbent materials and an incredible strength of the joints are the outstanding properties of PASCOFIX.

More Less

Product category: Service / installation / repairs center

PASCO FILL Filler 10g bottle

PASCO FILL Filler in combination with PASCO FIX Industrial Adhesive

PASCO FILL suitable as a filler, in combination with PASCO FIX is used for filling gaps, fillets, holes, joining or closing cracked component joints. Ideally suited for reinforcing repairs with very small bonding areas. PASCO FILL granulate can be used for all materials such as porcelain, wood, steel, non-ferrous metals, plastics, ceramics, paper, cork, etc. The hardened surface is mechanically resistant. The hardened surface can be mechanically processed (sanding, drilling, filing, milling) is waterproof and can be painted over.

More Less

Product category: Service / installation / repairs center

PASCO CLEAN special cleaner 20ml bottle

PASCO CLEAN special cleaner the all-rounder

PASCO CLEAN is a cleaner containing acetone, which has been precisely matched to our PASCO products and fulfils several functions:
  • Pretreatment or degreasing of soiled adhesive surfaces
  • Removal of excess adhesive
  • Loosening of joints / bondings
  • Removal of old adhesive residues
  • Cleaning of skin and hands
  • Cleaning / replacing the dispensing tip

More Less

Product category: Service / installation / repairs center

PASCO PRIME 15ml glass bottle with brush

PASCO PRIME and PASCO FIX, the first adhesive that bonds polyolefins and is suitable for the following plastics:
  • Polyethylene (PE)
  • Polypropylene (PP)
  • Teflon (PTFE)
  • Silicone rubber
  • termoplastic elastomers (TPE)
PASCO PRIME is a solvent-based pre-treatment agent for improving the adhesive strength of the PASCO FIX special adhesive on non-polar plastic surfaces. PASCO PRIME is particularly suitable for pretreating polyethylene, polypropylene and silicone. With the PASCO PRIME a practical possibility is now offered to realize in a simple way high strengths in the bonding of non-polar plastics with cyanoacrylate adhesives. The low-viscosity primer solution is applied to the difficult-to-bond plastics by dipping, brushing or spraying. After a short evaporation time of the environmentally friendly solvents, a high-strength, age-resistant bond can be made in seconds with the PASCO FIX special adhesive after final curing. The pre-treated surfaces do not have to be bonded immediately; intermediate storage of the activated materials for several hours does not affect the curing.

More Less

Product category: Service / installation / repairs center

PASCO REP steel modelling clay 60g

PASCO REP steel 2 component plasticine 60 g. The universal epoxy resin repair compound that has it all.
  • easy to handle
  • cut - knead - process
  • always the right mixing ratio
  • very high strength, extremely resilient
  • cold and heat resistant (- 40 degrees to approx. 200 degrees Celsius, short term up to 300 degrees)
  • resistant to chemicals (acids, alkalis, etc.)
  • high compressive strength
  • easy to dose / portion
  • can be mechanically processed (grinding, drilling, milling, filing and thread cutting)
  • brushable and paintable
PASCO REP Steel is a 2-component epoxy resin repair putty. Both components (resin outside and hardener inside) are in the roll. The decisive advantage: you always have the right mixing ratio. PASCO REP adheres to steel, aluminium, bronze, brass, lead, gold, silver and all metals. PASCO REP is temperature resistant. PASCO REP is resistant to petrol, diesel, alcohol, esters, salt water, oils and most acids and alkalis. PASCO REP contains no solvents and cures with practically no shrinkage. The cured material can be machined (drilled, filed, milled, sanded) and painted or overpainted without pretreatment. Used for sealing boilers, pumps, metal housings, water pipes, heating pipes, exhaust pipes, radiators, heaters, gearbox and engine blocks, oil pans and much more.

More Less

About us

Company portrait

About us

PASCO Industrial Adhesives has set itself the goal of bringing a universally applicable adhesive to the market that meets the high demands of industry, while at the same time eliminating the disadvantages of conventional adhesives such as rapid drying and complicated, time-consuming processing.

With the PASCOFIX industrial adhesive you get a product which was developed for long storage stability and highest adhesive strength.

The PASCOFIX industrial adhesive was developed exclusively for our company according to our order and is unique in its kind and quality.

Our 20 years of experience in adhesive technology and worldwide years of experience in dealing with adhesives and their development led in the end to the creation of this unique industrial adhesive.

Already in 2005 an office and distribution center was established in Los Angeles/USA to meet the growing demand on the American continent.