Manage stand orders
Select Option

Weih-tec

In der Lehmgrube 3, 88326 Aulendorf
Germany
Telephone +49 7525 924967-0
Fax +49 7525 924967-30
info@weih-tec.de

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Hall map

CARAVAN SALON 2021 hall map (Hall 13): stand C73

Fairground map

CARAVAN SALON 2021 fairground map: Hall 13

Our products

Product category: Bicycle racks

Foldable and removable bicycle carrier - type Universal F/A

Carrier for integrated and semi-integrated motorhomes
Bicycle carrier
foldable, removable
---
Mounting on
Vehicle frame
---
for 2 or 3 bikes

Technical data:
  • Own weight: approx. 20 kg carrier (+ vehicle-specific mountings)
  • Load capacity: 90 kg (axle load and frame payload)
    of the vehicle )
  • Dimensions: width: 166 cm; depth from bumper: approx. 70/80 cm
  • Scope of delivery: pre-assembled carrier incl. lighting with
    13-pin connector plug, mounting kit
    straps and holding arms for 2/3 bicycles,
    Vehicle-specific mountings (approx. 8 kg),
    Bicycle rails, ECE approval.

More Less

Product category: Bicycle racks, Motorcycle racks

Removable scooter/bike carrier - type Universal S/A

Carrier for integrated and semi-integrated motorhomes
Scooter/bike carrier
removable
---
Mounting on
Vehicle frame
---
for 1 scooter
Scooter with bike
or up to 4 bicycles

Technical data:
  • Own weight: approx. 22 kg carrier (+ vehicle-specific mountings)
  • Load capacity: 170 kg (axle load and frame payload of the
    note vehicle)
  • Dimensions: width: 180 cm; depth from rear wall: approx. 66 cm
  • Scope of delivery: pre-assembled carrier incl. lighting with
    13-pin connector plug, drive-on rail,
    fastening set straps and holding arms for 1 scooter,
    Vehicle-specific mountings (approx. 8 kg),
    ECE certificate.

More Less

Product category: Bicycle racks, Motorcycle racks

Hydraulically lowerable motorcycle carrier - type Universal Hy/A-170

Carrier for integrated and semi-integrated motorhomes
Scooter/bicycle carrier
hydraulically lowerable, removable
---
Mounting on
Vehicle frame
---
for 1 scooter or scooter and 1 bicycle

Technical data:
  • Own weight: approx. 54 kg carrier (+ vehicle-specific mounts.)
  • Load capacity: 170 (150) kg (axle load and frame payload of the scooter)
    Note vehicle )
  • Dimensions: width: 180/200 cm; depth from rear wall: approx. 74 cm
  • Scope of delivery: pre-assembled carrier incl. lighting with
    13-pin connector plug,
    fastening set straps and holding arms for 1 scooter,
    vehicle-specific mountings (approx. 8-20 kg),
    short drive-on rail, ECE certificate.
The vehicle-specific E-set (socket on the vehicle) is not included in the scope of delivery
and must be ordered additionally!

More Less

Product category: Bicycle racks, Motorcycle racks

Scooter/bike carrier EuroCarry Slide -170

Carrier for panel van
Scooter/bicycle carrier
sliding, removable
---
Mounting on
Vehicle chassis
---
for 1 scooter
Scooter with bike
or up to 4 bicycles

Technical data:
  • Dead weight: approx. 40 kg carrier (+ vehicle-specific mountings)
  • Load capacity: 170 kg (note rear axle load of the vehicle)
  • Dimensions: Width: 180 cm; Depth from rear wall: approx. 65 cm
  • Scope of delivery: pre-assembled carrier incl. lighting with
    13-pin connector plug, drive-on rail,
    fastening set straps and holding arms for 1 scooter,
    vehicle-specific mounts (approx. 8-20 kg),
    ECE certificate.
The vehicle-specific E-set (socket on the vehicle) is not included in the scope of delivery and must be ordered separately!

More Less

Product category: Bicycle racks

Bike carrier SlideMove DS

Bicycle carrier for panel van
movable on both sides
removable
---
Mounting on
Vehicle chassis
---
for 2 bikes
---
very good for
E-bikes suitable


Technical data:
  • Own weight: approx. 29 kg carrier (+ vehicle-specific mountings)
  • Load capacity: 70 kg (note rear axle load of the vehicle)
  • Dimensions: width: 185 cm; depth from bumper: approx. 70 cm
  • Scope of delivery: pre-assembled carrier incl. lighting with
    13-pin connector plug, mounting set
    Straps and holding arms for 2 bicycles,
    Bicycle shells (widened shells possible)
    Vehicle-specific mountings (approx. 8-20 kg),
    ECE-certificate.
The vehicle-specific E-set (socket on the vehicle) is not included and must be ordered separately!

More Less

Product category: Bicycle racks, Motorcycle racks

Scooter/Bike Carrier Universal S/A-200 VW T5/T6

Carrier for panel vans
Scooter/bike carrier
removable
---
Mounting on
Vehicle chassis
---
for 1 scooter
Scooter with bike
or up to 4 bikes

Technical data:
  • Dead weight: approx. 30 kg carrier (+ vehicle-specific mounts)
  • Load capacity: 200 kg (note rear axle load of the vehicle)
  • Dimensions: width: 180 cm; depth from rear wall: approx. 68-75 cm
  • Scope of delivery: pre-assembled carrier incl. lighting with
    13-pin connector plug, drive-on rail,
    fastening set straps and holding arms for 1 scooter,
    Vehicle-specific mountings (approx. 8 kg),
    ECE-certificate.

More Less

Product category: Motorcycle racks

Rear garage scooter carrier MotoMove-150

Scootercarrier for the motorhome garage
Scooter carrier

retractable
---
for 1 scooter
---
Assembly with transverse sliding profiles
in the motorhome garage
---
can be combined with SlideMove HG and LoadMove R2

Technical data:
  • Dead weight: approx. 24 kg carrier
  • Load capacity: 150 kg ( pay attention to the load capacity of the rear garage )
  • Dimensions: Depth max. 200 cm, length cross profiles 100 cm
  • Scope of delivery: pre-assembled carrier with 3 transverse sliding profiles
    and screw-on set, drive-on rail,
    Front wheel rocker with rails for 1 scooter,
    Fastening set holding straps for 1 scooter

More Less

Product category: Bicycle racks

Rear garage bike carrier SlideMove HG-250

Bicycle carrier for the motorhome garage
Bicycle carrier
extendable on both sides
and transversely slidable
---
for 2 bikes also e-bikes
---
Mounting with transverse sliding profiles
in the motorhome garage
---
can be combined with MotoMove and LoadMove R2

Technical data:
  • Dead weight: approx. 20 kg carrier
  • Load capacity: 70 kg (note the load capacity of the rear garage)
  • Dimensions: Depth 185 cm, length cross profiles 100 cm
  • Scope of delivery: pre-assembled carrier with 2 transverse sliding profiles
    and screw-on set,
    bicycle shells for 2 bicycles,
    mounting bracket, mounting set straps and
    Holding arms for 2 bicycles.

More Less

Product category: Bicycle racks

Rear garage racking system LoadMove-R2

Shelving system for the mobile home garage
Shelving system extendable on both sides
and transversely slidable
---
adjustable in width and height
---
Installation with transverse sliding profiles
in the motorhome garage
---
with MotoMove and
SlideMove HG can be combined

Technical data:
  • Own weight: approx. 40 kg carrier
  • Load capacity: 150 kg (note the load capacity of the rear garage)
  • Dimensions: Depth 189 cm, length cross sections 100 cm
  • Scope of delivery: two pre-assembled supports with
    2 cross profiles and screw-on set,
    2 shelf modules with assembly set
    (without boxes)

More Less

About us

Company portrait

35 years of carrier systems

In business for 35 years
In our family business we put our own ideas and of course the ideas of our customers into practice with all our knowledge and skills. Our business partners benefit from our many years of experience in the field of construction and development. The size of our company allows short ways from construction to production and a close cooperation with our customers.

Company chronicle
The company founder Alfred Weih was a master craftsman in the development department of the Hymer company for many years. 35 years ago, he started producing the first motorcycle carriers for motorhomes in the cellar of his home. Due to the great success of the carriers, the company soon moved to a larger workshop and the part-time job became self-employment. In order to optimize the production processes and to meet the demand, a new hall was bought in 1996. This is still the headquarters of the Weih company today.
On June 1, 2016, the successful company was handed over within the family and has since been continued by Robert Buck, the son-in-law of the company founder.

First design then production
Every development starts with the CAD design.
According to these drawings a prototype or a custom-made product is manufactured.