Manage stand orders
Select Option

GuG GmbH

Von-Braun-Str. 21, 48683 Ahaus
Telephone +49 2561 971323
Fax +49 2561 971323

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Hall map

CARAVAN SALON 2021 hall map (Hall 13): stand E75

Fairground map

CARAVAN SALON 2021 fairground map: Hall 13

Our range of products

Product categories

  • 05  Detachable parts and components for caravans and motor caravans
  • 05.07  Bathroom units / Lavatories / Drainage systems
  • 05.07.06  Toilet systems
  •  Additional sanitary equipment

Additional sanitary equipment

  • 06  Installations / Heating / Gas / Water
  • 06.01  Fittings (Gas)

Fittings (Gas)

  • 06  Installations / Heating / Gas / Water
  • 06.05  Gas tanks

Our products

Product category: Gas tanks

Fuel gas tank

The fuel gas tank is a gas tank for refueling with liquid petroleum gas. In contrast to car gas tanks or stacker tanks, the withdrawal of fuel gas tanks takes place from the gaseous phase. The gas withdrawn in gaseous form is used for fuel purposes, for cooking and heating in motor homes, for example. Furthermore, the gas extracted from the gas tank is used in sales vehicles for operating deep fryers and gas grills or is also used for operating tar cookers in road construction.

Inside the gas tank, the gas is in liquid form. Liquefied petroleum gas is a gas mixture of propane gas and butane gas, it is called autogas or LPG (Liquid Petroleum Gas). The gas is extracted from the gas tank (pressure vessel) through a labyrinth tube inside the fuel gas tank.

The correct installation position of the tank is important here; the prescribed installation position must be observed. As standard, the gas tanks are aligned at 105 degrees, unless explicitly stated otherwise. When the gas tanks are aligned at 105°, the fitting plate is slightly tilted downwards. When the tanks are installed in the correct position, the labyrinth tube passes through the liquid gas from below and ends above the liquid gas level. Above the liquid gas level in the gas tank, the propane/butane vaporizes to a vaporous gas mixture and falls down through the labyrinth tube to the gas withdrawal valve. Here it can be used as a useful gas for combustion purposes. The gas withdrawn from the gas tank is heavier than air.

To align the gas tank, pre-position the fitting plate to 105 degrees and then align it exactly until the positioning sticker (cross) is halfway up the tank diameter.

The function of the valves installed in the tanks is only guaranteed if they are correctly aligned, as the content indicator and the automatic fill stop valve are float-based. Only when the tank is correctly aligned can the fill stop valve automatically stop the refuelling process at 80 % LPG level.

More Less

Product category: Gas tanks

Tank bottle

As early as 1984, the tank cylinder was developed by our employees in cooperation with the tank manufacturer Witte van Moort.

The starting point was the inconsistent gas supply in Europe - a cross-border gas supply was needed.

The advantages of the tank cylinder:

flexible gas supply
unlimited use
Content readable at any time
favourable gas supply
Acceptance according to G 607

According to the definition, the tank cylinder is a stationary gas tank in upright design. Firmly connected to the vehicle, it may be refuelled at gas filling stations. Acceptance takes place in accordance with R 67-01.

It is a good alternative to conventional 11 kg standard cylinders (steel or aluminum), because gas cylinders that have an approval as stationary pressure vessels (usually with π-marking) may not be filled at gas stations.

More Less

Product category: Gas tanks

Bettanker filter

The refuelling filter aluminium is mounted between the nozzle and the tank connection during refuelling.

Suitable for gas tanks and tank bottles, is screwed into the ACME thread or external filling plate with internal thread W 21.8.

Protects the tank system from contamination, sinter filter filters dirt and small particles

Filling adapters can be screwed in or on.

More Less

About us

Company portrait

For over 25 years, we have been your wholesaler and contact partner when it comes to mobile gas supply.

Our range of gas tanks for recreational and commercial vehicles, forklift trucks and forklift trucks range from tanks with a capacity of 21 to 200 litres.

In addition to gas tanks, we offer numerous products for the camping and leisure sector, from sanitary liquids to dehumidifiers.

Furthermore we are supplier of sealing and bonding materials, which are used in different areas.

We are pleased to welcome you on our homepage and wish you an informative stay.

Your dealer inquiry is welcome.

GuG GmbH, Ahaus